I’ve got more “Foam and Foil” Capacitive Pads for KeyTronic Keyboards stocked now and they go fast! I am punching up more each day as well as getting more material ready to try avoid going out of stock again. The weather has been cutting into curing time as humidity can make this take a bit longer. Please rest assured I am doing what I can to stay in stock, hopefully I am ahead of the game now. However, if do you arrive at the store only to find they are gone again, just send me an email and I will personally contact you as soon as I have more listed again. Thank you for your patience!
After a couple of SOL users were having issues with the pads working consistently and some experimentation along with lots of input from the vintage computer community we decided the closed cell foam I was using was just a tad too short for the SOL. Since I was going to be changing the foam anyway, and had requests for foam more like the original KeyTronic pads, I thought meeting customer demand was the way to go! I went ahead and moved away from the closed cell foam and opted for more resilient and taller open cell foam that is just like the OEM foam. Now the keys feel more like they did when they were new from KeyTronic. You can find the new pads here:
These new pads have officially been successfully tested on the following computers: Compaq Portable, Apple Lisa and the Franklin Ace 1000.
We would love to add your computer to the official tested list after installation. Please don’t hesitate to write a review here on the product listing or you are welcome to just send an email letting us know about your experience using these pads!
Our goal is to provide fully assembled pads that require no deconstruction, cleaning, cutting, punching or gluing for all KeyTronic keyboard restorations. All feedback is welcome and appreciated!
To see the saga of the pad revisions you can visit this older blog post. It includes links to the vcfed.org forum where the vintage computer community gathered to help me get this all figured out. It also contains photos of the machine Kevin built to help me make these pads more efficiently!
Here is a short video of a very nice customer installing these new pads in his Apple Lisa:
He used a nifty tool from a wax/pottery/clay carving and spatula set on Amazon or eBay. Here are just two examples to help get you started looking for these tools if you don’t already have a tool you can use:
*** Update 9/12/2018: We ultimately found that making the pads thicker helped our problem and we switched to open cell foam as it feels more like the OEM foam provided by KeyTronic. Here is a link to the latest post about this. ***
** Update 7/26/2018: After some issues with some SOL machines I am now currently working on finding and using a new foam that will be more like the original KeyTronics OEM foam capacitive pads. My hope is that it will ensure continuity across all machines and the key presses will feel like they did back in the day. I am dedicated to finding the best solution and providing it for you! No more cleaning, cutting, hammering fiddling, hurting, tedium and torture. 😄 I want to give a big THANK YOU SO MUCH to the ever patient vintage computer community! I couldn’t do it without all of your testing and input!!! If you want to see the saga for yourself I have provided links later in the post to a couple of different forums where you can see it all being hashed out play by play. Fair warning, I can be quite long winded at times, so please brace yourself. ***
We started selling these pads about a year ago, back then I was gluing large sheets plastic to foam and capacitive material and then hammering each pad out with a leather punch and hammer. While it is better than removing the original disintegrated foam pads from keyboards, cleaning the plastic and foil and then gluing pre-cut foam into those parts, it is still tedious and very loud work. After hammering out many, many bags my family began to protest.
That’s when we decided to try using a modified arbor press. While there was much less noise involved, this method did not prove to be much better as the continual need for using force was just too labor intensive for me to provide a steady flow of inventory. That’s when my husband, Kevin, decided to try his hand at designing and building a machine that would make the process quicker and more consistent. It took quite a while to get the design completed and built.
In that time we didn’t receive much feedback on the pads at all, good or bad. I had replaced the pads myself on several Compaq portables (luggables), Tandy machines and quite a few different terminals without much issue. Mostly just seating issues, or so I thought that was the issue at the time. The materials I was using never really came into my mind as a factor. If you have ever installed these pads, you know that getting the plastic seated under the clips can be a bit finicky and frustrating, but I thought I had it all down to a science. As I demonstrate in my video:
Fast forward many months later and the machine was finally up and running! After a few tests and trials we started making new pads with all the same material but the process was faster, much quieter and I was getting more consistent results as long as I didn’t try to punch too many layers stacked at a time. Here is the machine:
I have found that I get the best results by punching just one pad out at a time instead of trying to stack multiple layers of material to punch more than one at a time. This ensures that the plastics stay round and more consistent. Sometimes I get a bit too close to the edge or to an area where I have punched a previous pad so there is still some quality control at play. I provide 100 pads in each set to try and cover any pads I may miss as I check hundreds of pads in a row for consistency. Still, this process is much faster and more reliable than the constant banging of a hammer.
Also, the machine has to be calibrated each time I start a new round of punching and I did manage to fudge that a bit before I was fully acquainted with the machine. I unknowingly bent the punch that is on the machine and this made some of my pads a bit too slanted and I didn’t see it as I looked at each pad in quality control. I was mainly looking for roundness of the plastic and foil so it slipped by me.
We began selling these pads and about a month later I finally started receiving feedback. Some of it was about the slant but mostly we were getting complaints that some of the pads were not working at all, even after making sure they were seated properly. A couple of my customers suggested that the material was not the proper “foil” and there was just no capacitance happening. Some even managed to do an ohm test, which we had never even considered trying. The pads had worked for us on so many keyboards in the past so the thought never even crossed our minds.
One of my customers brought it to my attention that there was some talk about my pads on an Apple Lisa group on Facebook. So I joined the group and started talking with some very nice vintage computer connoisseurs there. They had some really great suggestions for me! I did some research and found a better material, aluminum plated Mylar, which I found I could purchase by the roll. It is a material that will not soon go away as it is used in many different applications. So I got to work ordering then cutting, gluing and punching! After a test or two of my own, along with tests by a couple of different customers, one of which being an Apple Lisa owner, the final product is ready and working better than our original material ever worked! Sometimes it’s hard to see the forest for the trees, especially when you are buried very deep within that forest. 😉 ** I have sent replacement bags out to customers who have contacted me. I have also been proactive answering questions via the Vintage Computer Federation forum and the Apple Lisa group. If you are one of these people who have ordered the old pads, please don’t hesitate to contact me! **
I also learned that some of the KeyTronics, like Apple Lisa keyboards, have a need for a deeper seated foam pad like the mechanical Caps Lock key. So I am now including a small bag of two double height pads with each bag of 100 “foam and foil” pads. These have already been tested and fit nicely.
I have received a couple of critiques on the density of the foam I am using. Our foam is more dense than open cell, which is what was originally used, and it will have a longer life overall so I am sticking with that for the time being. It will make the key presses feel a bit different but your keyboard will work great and for a much longer period of time! Maybe I will venture out from there later on for you purists out there, but for now, I do think this foam will have a longer shelf life than the original foam that KeyTronic used in the beginning.
Below is a short list I have compiled after speaking with customers and the nice people who have helped me get the material straightened out and tested. If you have a computer you have used these on that is not on this list, I’d love to see a comment on this post! I will add new machines to my is here and in our store(s) listings to help others find the pads for their own vintage machines:
Compaq Portable (also known as the Luggable)
Apple Lisa 1
Apple Lisa 2
Sol 20 Terminal
Another link for reference with more keyboards that should support these pads from Deskthority. Included in that link are the following machines: